For Sale
3D Printers and filament. 
UltiMaker S7/S5, Method X

IMG_0417.png
IMG_0435.png
IMG_0432.png
IMG_0429.png
IMG_0433.png
IMG_0431.png
IMG_0421.png
IMG_0426.png
IMG_0420.png
IMG_0419.png
IMG_0418.png

Not for sale by thebuildery, just posted here
Email info@thebuildery.com for contact information

Price: $2,000 cash. Must take everything.

Location: Local pickup only in Austin, TX. You will need a truck or van and someone to help you load; I cannot assist with loading.

Hardware Included:

  • UltiMaker S7 + Material Station: Dual extrusion, built-in air filter, camera, and 6-spool filament bay. Works reliably, with occasional TLC.  Comes with a bunch of extruders, in various states of having been used.

  • UltiMaker S5 + Material Station & Air Manager: Dual extrusion, built-in air filter, camera, and 6-spool filament bay. Works reliably but needs more attention than the S7.  It prints fine but occasionally throws a filament jam or balance error code. Usually clears with a reset, but I have had to replace the internal SD card with new firmware. The good thing about this ultimaker is that it's fixable and accessible, but it requires some familiarity with the S-line architecture.  The screen has a little burn out but not enough to impede use. Comes with a bunch of extruders, in various states of having been used.

  • MakerBot Method X: These machines are really well engineered. The machine works reliably. The chamber also has a filament drying mode. Includes 8 extruders in various states of use,  and two build plate grip surface kits.

  • Formlabs Form 2 SLA Printer/Wash/Cure for parts: You should assume this does not work,  but you might get it working. Not being cryptic, this came from the combining of two labs and needs someone to spend time with it to see if it works.  Includes Form 2 printer, Form Wash, and Form Cure. This is untested, missing one power cord, and treated as a complete giveaway. No guarantees it works; consider it for parts, repair, or resin materials.

Consumables & Spares Included:

  • Parts: Selection of used and unused UltiMaker print cores (A and B types, 0.4 and 0.8mm) and X/Y calibration sheets.

  • Sealed Filament (Ages range from a few months to 2+ years

    • 7 UltiMaker brand spools

    • 5 MakerBot brand spools (includes Carbon Fiber)

    • 9 Hatchbox 1kg spools (PLA, ABS, PETG)

    • ~20x Mika3D 0.5kg spools

    • 3x Formlabs color base, 5x resin cartridges, 3x pigment pouches (older stock, as-is)

  • Opened Filament: A large box of opened spools if you want them for project scrap or drying.

Terms:

  • Cash only.

  • All sales final. Machines show standard wear from use.

  • Must take whole lot